Ender5 - Personal Blog

Heavy Tombstone - Update 6

Shes alive and almost finished. Heavy Tombstone is printing and has most of its configuration done. Thermals, Power, and print quality exceptional but need tuning.

3D Printer

Heavy Tombstone - Update 5

The liquid cooling loop and wiring for the extruder and heated bed is basically done. The HEPA/activated carbon filtering system has been installed as well as the 100W heater. Getting super close to finishing things off.

3D Printer

Heavy Tombstone - Update 4

The last two weeks have been very productive. Not only did I finish a solution to drive the LEDs, I also have completed the mainboard box for the mainboard, raspberry pi and Hotbed Mosfet. I have also been fiddling with the new thermal camera, which is proving to be a very good tool.

Ender5

Heavy Tombstone - Update 3

AC power is done, with the regulators and front panel meters wired. The insulation for the hood arrived Friday and was installed/tested. Crossbars and Hood LEDs were installed.